| Paint stripper is the only way to go if you intend to remove all the paint. It'll remove the paint down to the bare metal. You'll spend hours trying to remove with anything else But here's a tip... Go over each panel with a magnet before applying the stripper. That way you'll find any areas with body filler. Paint stripper will effect the filler & you'll end up doing body work as well. Circle any areas that are suspect & sand them down with medium grit sandpaper by hand with a good sanding block.
The fumes from the paint stripper are dangerous so only use it in well ventilated areas & wear rubber gloves to protect your hands. |